View previous topic :: View next topic |
Author |
Message |
Quaxxx Snailer
Joined: 24 Sep 2010 Posts: 46 Location: Freiburg - Germany
|
Posted: Tue Jul 03, 2012 12:34 pm Post subject: |
|
|
like! not just because i have the same tyre-size ...
/ _________________ Quaxxx from Freiburg / Germany
Ami 8 berline 1975 |
|
Back to top |
|
|
josh d Dropped
Joined: 29 Oct 2010 Posts: 189 Location: chichester uk
|
|
Back to top |
|
|
josh d Dropped
Joined: 29 Oct 2010 Posts: 189 Location: chichester uk
|
|
Back to top |
|
|
jopro Snailer
Joined: 13 Aug 2009 Posts: 59 Location: England
|
Posted: Sun Jul 08, 2012 10:12 pm Post subject: |
|
|
Liking it! Good work :) _________________ Lowering the tone since 1983 |
|
Back to top |
|
|
josh d Dropped
Joined: 29 Oct 2010 Posts: 189 Location: chichester uk
|
Posted: Mon Jul 09, 2012 7:12 pm Post subject: |
|
|
Haven't had to change the inner arch much
Beater picture of the rear panel
Wider tyres look good on the back and fit under the arch
Was thinking of not having arches on the back just have the wheels showing
Seat belt mounts both in and filled in one of the 3rd windows
_________________ its nice..... high five....
http://www.wix.com/joshuadraper/stuff#!
www.artof2cv.co.uk |
|
Back to top |
|
|
breninfrance Dropped
Joined: 16 Jan 2012 Posts: 166
|
Posted: Mon Jul 09, 2012 7:46 pm Post subject: |
|
|
I hate you
I've just started to weld up my third windows today!!
I like where you're heading with the build _________________ if it aint broke, fix it till it is |
|
Back to top |
|
|
josh d Dropped
Joined: 29 Oct 2010 Posts: 189 Location: chichester uk
|
|
Back to top |
|
|
breninfrance Dropped
Joined: 16 Jan 2012 Posts: 166
|
Posted: Mon Jul 09, 2012 8:22 pm Post subject: |
|
|
you may finish before me then, cos I'm at work till Thursday
I used a few speakers, to hold the metal out flush with the body, whilst I put in a few tacks with the welder.
I'm not going to weld all the way around like you have, I've put a few tacks in to hold it in place, that's where I'm at now, but I intend to fill in on the inside with sikoflex, then a thin smear of filler on the outside (thinking of hunting down some plastic padding elastic).
I hope it doesn't bloody rain, cos it's my daily driver, and it'll piss in _________________ if it aint broke, fix it till it is
Last edited by breninfrance on Mon Jul 09, 2012 8:53 pm; edited 1 time in total |
|
Back to top |
|
|
josh d Dropped
Joined: 29 Oct 2010 Posts: 189 Location: chichester uk
|
Posted: Mon Jul 09, 2012 8:24 pm Post subject: |
|
|
I would weld it all the way round over wise as soon as you go over a bump the body will flex and it will crack _________________ its nice..... high five....
http://www.wix.com/joshuadraper/stuff#!
www.artof2cv.co.uk
Last edited by josh d on Tue Jul 10, 2012 12:05 am; edited 1 time in total |
|
Back to top |
|
|
breninfrance Dropped
Joined: 16 Jan 2012 Posts: 166
|
Posted: Mon Jul 09, 2012 9:18 pm Post subject: |
|
|
sikoflex is bloody good stuff, it's what they use to bond quarter panels on, an inch of sikoflex at the rear of the panel, pushed into the gap will probably move less than a welded panel, and certainly wont crack!
if I combine it with PP elastic, it should be fine!! _________________ if it aint broke, fix it till it is |
|
Back to top |
|
|
JoZeF Grave Digger
Joined: 25 May 2007 Posts: 1734
|
Posted: Tue Jul 10, 2012 12:50 am Post subject: |
|
|
did you shape/curve the insert ? because that area of the body on a 2cv originally with no 3rd window is not flat _________________ "That bumper fits there like sunglasses on pig" O.E.
|
|
Back to top |
|
|
josh d Dropped
Joined: 29 Oct 2010 Posts: 189 Location: chichester uk
|
|
Back to top |
|
|
breninfrance Dropped
Joined: 16 Jan 2012 Posts: 166
|
Posted: Tue Jul 10, 2012 8:17 am Post subject: |
|
|
I used very thin steel (I know it'll be more prone to flexing later )
I tacked at the upper front and worked down and back, letting the sheet flex for the slight taper rearwards.
what's your plan for indicators? _________________ if it aint broke, fix it till it is |
|
Back to top |
|
|
JoZeF Grave Digger
Joined: 25 May 2007 Posts: 1734
|
Posted: Tue Jul 10, 2012 11:10 am Post subject: |
|
|
it's also curved.
you'll probably see what I mean once the car is painted.
If anyone is feeling brave to do this mod nicely I have a set of offcuts from a 50s 2cv body available _________________ "That bumper fits there like sunglasses on pig" O.E.
|
|
Back to top |
|
|
josh d Dropped
Joined: 29 Oct 2010 Posts: 189 Location: chichester uk
|
|
Back to top |
|
|
|