SNAIL Forum Index SNAIL
☠ Vintage School 2CV
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

I need BOLTS

 
Post new topic   Reply to topic    SNAIL Forum Index -> Wanted
View previous topic :: View next topic  
Author Message
wooly2cv
Snailer


Joined: 03 Jan 2008
Posts: 14
Location: colchester,essex

PostPosted: Sat Mar 14, 2009 6:12 pm    Post subject: I need BOLTS Reply with quote

Hi. I need BOLTS. I'm putting back together an AMI SUPER. ( FOUND IN FIELD ) The bolts i need, fit seat belt bracket to cill. There are 3 bolts that secure bracket. 1 fits in floor 12mm/ 2 fit in cill about 9mm fine thread. I need 2 that fit bracket to cill. CHEEEEEEEERS Question
_________________
I'M NEW TO WELDING
Back to top
View user's profile Send private message
JoZeF
Grave Digger


Joined: 25 May 2007
Posts: 1734

PostPosted: Sat Mar 14, 2009 8:22 pm    Post subject: Reply with quote

I can probably get you some of those

not before end of the month, though... and if I can get them off the car, that is... 'cause rust is often an issue in that area... Rolling Eyes
_________________
"That bumper fits there like sunglasses on pig" Laughing O.E.


Back to top
View user's profile Send private message
dyanut
Dropped


Joined: 05 Aug 2007
Posts: 177
Location: North Yorkshire

PostPosted: Sat Mar 14, 2009 10:11 pm    Post subject: Re: I need BOLTS Reply with quote

Hi,
iirc, the smaller ( M9) bolts into the sills should be the same as those holding the damper mounting plates onto the front radius arms on A series cars fitted with hydraulic dampers.
The larger thread is more likely to be 7/16 UNF, which is universal for seat belt attachments, rather than a metric thread... Confused

( You've got to be wary of that possibilty, as I've learnt with the pattern sills produced in Argentina, which sometimes had 12mm coarse captive nuts, then 12mm fine and eventually got round to the correct 7/16 UNF.
The really dangerous ones were when they used a metric fine thread, as the 7/16 bolt would fit in it, but pull out under load.)

Ken



wooly2cv wrote:
Hi. I need BOLTS. I'm putting back together an AMI SUPER. ( FOUND IN FIELD ) The bolts i need, fit seat belt bracket to cill. There are 3 bolts that secure bracket. 1 fits in floor 12mm/ 2 fit in cill about 9mm fine thread. I need 2 that fit bracket to cill. CHEEEEEEEERS Question
Back to top
View user's profile Send private message
JoZeF
Grave Digger


Joined: 25 May 2007
Posts: 1734

PostPosted: Sun Mar 15, 2009 1:24 pm    Post subject: Reply with quote

Thanks for that info.

I'm ok on that side of things, I don't have belts in mine Laughing
_________________
"That bumper fits there like sunglasses on pig" Laughing O.E.


Back to top
View user's profile Send private message
wooly2cv
Snailer


Joined: 03 Jan 2008
Posts: 14
Location: colchester,essex

PostPosted: Sun Mar 15, 2009 7:27 pm    Post subject: bolts Reply with quote

Thanks JOZEPH. If and when you get off let me know. CHEEEEEEERS RICHARD
_________________
I'M NEW TO WELDING
Back to top
View user's profile Send private message
dyanut
Dropped


Joined: 05 Aug 2007
Posts: 177
Location: North Yorkshire

PostPosted: Sun Mar 15, 2009 11:56 pm    Post subject: Reply with quote

Another case of me not seeing the wood for the trees.
The same bracket and bolts are used as seat belt anchorage reinforcements on 2CVs and Dyanes, but with the bolt positions reversed to how they're installed on Amis, so any scrap late 2CV should have them...

Ken
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    SNAIL Forum Index -> Wanted All times are GMT + 2 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © phpBB Group. Hosted by phpBB.BizHat.com